Share this article

Improve this guide

Homegroup cannot be set up in Windows 10/11 [BEST SOLUTIONS]

9 min. read

Updated onOctober 4, 2023

updated onOctober 4, 2023

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Networking is a crucial part of every computer, especially if you need to share files and collaborate with otherusers. This is extremely important if you’re working in a company or if you want to share files between two computers.

To do this, you first need to set up aHomegroup, butWindows 10usersare reporting an error that says “Homegroup cannot be set up on this computer”.

How can I fix issues with the homegroup in Windows 10?

Homegroup is a usefulfeaturethat allows you to easily share files across the PCs in the samenetwork, but manyusersreported that they are unable to create a Homegroup onWindows 10.

Speaking of Homegroup issues, these are some of the most common problems thatusersexperienced with Homegroups:

Solution 1 – Delete files from PeerNetworking folder

Can’t delete certain files and folder in Windows 10? Check out this guide and fix the issue in just a couple of steps.

Solution 2 – Enable Peer network grouping services

Sometimes it can happen that services needed for Homegroup to work are disabled for some reason, but there’s a way to enable them.

We have to mention that you might have to do this for all the computers in yournetwork.

If you encounter peer networking error 1068 on Windows 10, you can solve it by following thishandy guide.

Solution 3 – Allow Full Control to MachineKeys and PeerNetworking folders

We have to mention that you might have to do this for all of your computers in anetwork.

Homegroup cannot be set up on this computer is an annoyingWindows 10error, and if none of these solutions were helpful, maybe you should perform a clean install as a last resort.

If you need to take ownership of a file or a folder in Windows 10, this guide will help you do just that.

Solution 4 – Rename MachineKeys directory

If you can’t set up a Homegroup onWindows 10, the issue might be related to MachineKeys folder. However, you can fix the issue simply by renaming the MachineKeys directory. To do that, just follow these steps:

After recreating the MachineKeys directory, the issue should be completely resolved and you’ll be able to set up a Homegroup once again. Manyusersreported that this solution worked for them, so be sure to try it out.

Rename your files and folders automatically. Here are the best file renaming tools available right now.

Solution 5 – Turn off all PCs and create a new Homegroup

If you’re unable to set up a Homegroup inWindows 10, the issue might be other PCs. Other PCs in yournetworkcan sometimes interfere and cause issues with Homegroup to appear. However, you can fix the problem simply by doing the following.

This solution might be a bit complicated, but severalusersreported that it works, so be sure to try it out.

Solution 6 – Make sure that your clock is correct

If you can’t set up a Homegroup on your PC, the problem might be your clock. Severalusersreported that theirclock was incorrectand that caused the problem with Homegroup to occur.

If you can’t set up a Homegroup on your computer, be sure to check if the time is correct. To adjust the time on your PC, do the following:

This is an unusual solution, but severalusersreported that adjusting their clock fixed the problem for them, so be sure to try it.

See if your Windows Time service is working properly by following this step-by-step guide.

Solution 7 – Check the Homegroup password

ManyWindows 10usersreported that they can’t join a Homegroup because they don’t have the necessary password. This can be an annoying problem, but there’s a way to fix it. To fix this issue, simply do the following:

After doing that, you should be able to see thepasswordfor your Homegroup and use that password to connect other PCs. Keep in mind that this solution works only if you already have a Homegroup set up on your PC.

If you’re having trouble opening the Setting app, take a look at this article to solve the issue.

Solution 8 – Make sure that IPv6 is enabled on all PCs

If you’re unable to set up a Homegroup, the issue might be the IPv6feature. According tousers, thisfeaturemight be disabled on some computers and that can cause this issue to appear.

However, you can easily fix the problem by enabling IPv6. To do that, just follow these steps:

After enabling IPv6 for all PCs, you should be able to set up Homegroup without any problems.

Solution 9 – Change the computer name

If you’re having Homegroup problems on your PC, you might be able to solve them simply by changing the name of the affected PCs.

By changing the computer name, any configuration problems that you have with Homegroup should be resolved. To change the name of your computer, do the following:

Keep in mind that you need to repeat this step for all computers in thenetworkthat are affected by this issue. After doing that, you should be able to connect to Homegroup without any problems.

Want to rename your PC faster? Check out this dedicated guide on how to quickly change your PC’s name.

If you have any otherWindows 10-related issues you can check for the solution in ourWindows 10 Fixsection.

Homegroup cannot be set up in Windows 10/11 [BEST SOLUTIONS]#

How can I fix issues with the homegroup in Windows 10?#

Solution 1 – Delete files from PeerNetworking folder#

Solution 2 – Enable Peer network grouping services#

Solution 3 – Allow Full Control to MachineKeys and PeerNetworking folders#

Solution 4 – Rename MachineKeys directory#

Solution 5 – Turn off all PCs and create a new Homegroup#

Solution 6 – Make sure that your clock is correct#

Solution 7 – Check the Homegroup password#

Solution 8 – Make sure that IPv6 is enabled on all PCs#

Solution 9 – Change the computer name#