How to Set Up & Change Network Scanning on the Epson Event Manager

Event Manager enables you to set your device for online scanning

5 min. read

Updated onOctober 4, 2023

updated onOctober 4, 2023

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Key notes

If you are confused about how to set up and change the network scan settings on the Epson Event Manager, this guide is just for you.

The Epson Event Manager is a utility that allows you to control the functions of the scanner directly from the desktop.

It sits in the notification area of your taskbar and should be connected to the scanner to take advantage of the main features of the Epson product.

However, for this, you should set up the network scan settings on the Epson Event Manager.

But if it’s theEpson scan that’s not working on your Windows 11 PC, then you can follow our detailed guide for more information.

How do I connect my Epson scanner to my network?

To connect the scanner to your network, enter the SSIDs (network name) and the passwords of your Wi-Fi router and the scanner.

For this, your PC/device must be Wi-Fi enabled so that it can set up the connection. At the same time, make sure that you have installed the scanner software based on the manual.

Best of all, you can also re-install the scanner software and then connect to the network as shown below:

However, you must set up network scanning next to connect your computer and wireless scanner which we will explain below.

If you have more than one scanner and wondering how to share the Epson Scanner on the network, you must find out the IP address of the scanner. Here’s how you can:

Now, look for your scanner in the list and note down the IP address.

The default IP address setting for the Epson scanner is Auto, Panel, and PING, and the default IP address is 0.0.0.0 to 255.255.255.255.

Want to know how to scan using the Epson Event Manager? You can follow the below instructions to set up network scanning on the utility first.

How do I set up network scanning on the Epson Event Manager?

Once done, close the Event Manager and you have now successfully set up the Epson network scan settings on your Windows 10/11 PC.

Why is my Epson scanner not connecting to my computer wirelessly?

There could be several reasons why your Epson Scanner may not be connecting to your computer wirelessly, such as:

While adding the Event Manager utility to the Firewall/antivirus exclusions list can fix the issue, using an IPv4 network can also help the scanner connect to your PC wirelessly.

Also, make sure that the Epson device supports the scanner button to start a scan over a wireless network.

But if you are facing aproblem with the Epson scanner on your Windows 10PC, we have some effective workarounds for you in this detailed post.

For any other queries related to the Epson scanner or the Event Manager utility, do let us know in the comments box below.

How to Set Up & Change Network Scanning on the Epson Event Manager#

How do I connect my Epson scanner to my network?#

How do I set up network scanning on the Epson Event Manager?#

Why is my Epson scanner not connecting to my computer wirelessly?#

How to Set Up & Change Network Scanning on the Epson Event Manager

How do I connect my Epson scanner to my network?

How do I set up network scanning on the Epson Event Manager?

Why is my Epson scanner not connecting to my computer wirelessly?