Share this article
Improve this guide
Video_tdr_failure atikmpag.sys Error in Windows 10 [Fix]
4 min. read
Updated onOctober 4, 2023
updated onOctober 4, 2023
Share this article
Improve this guide
Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more
Key notes
In most situations, the errors that you may experience while usingWindows 10are caused by the firmware itself.
Sometimes, certain alerts and errors are being displayed because ofcorrupted filesrelated to hardware components, such as the graphics card.
In our situation, thevideo_tdr_failure atikmpag.sysalert is telling you that something went wrong with your AMD / ATIgraphics card.
Don’t panic, this isn’t a hardware malfunction, but a software mismatch between your graphics card and theWindows 10platform.
Thus, as always, whenBSoDerrorsoccur, you need to find the perfect troubleshooting solutions. And that’s why we are here for you.
How do I fix video_tdr_failure atikmpag.sys error in Windows 10?
1. Update display and graphic drivers
Keep in mind that all outdateddriverscause malfunction and errors.
Since updatingdriversmanually can be a long and tedious process, you might want to use a tool that will automatically update all yourdriversfor you.
Download and install Outbyte Driver Updaterto do it automatically. This tool will help you avoid permanent damage to your PC by downloading and installing the wrongdriverversions.
You will notice that after installation, this awesome tool starts automatically and begins scanning your system for any problems with the drivers.
After a few seconds, you will get a complete report with a list of all the drivers recommended for installation.
The only thing left to do is to hit theUpdate Allbutton. That’s if you want to install all the drivers.
If you just want to install the graphics card drivers, you will have to check the corresponding boxes from the left of their names and click on the Update buttons from their right.
⇒Get Outbyte Driver Updater
2. Reinstall the graphic drivers from Safe Mode
3. Use CMD commands
Note:If you are using an NVIDIA or Inteldisplaydriverthe issue will be slightly different because theerrorcode is namednvlddmkm.sysorigdkmd64.sysbut the solutions from above should help you fix them.
For more information on how to fixerrornvlddmkm.sys,check outthis troubleshooting guide.
More about the topics:BSoD error codes,System Errors
Andrew Wafer
Andrew is not just trying to bring you closer to Windows, but he’s truly interested in this platform. He just happens to be passionate about sharing that knowledge with our readers and that’s what makes his presence here, at WindowsReport, such a valuable one.
He specializes in writing about the best products for this operating system and Windows 10 fixes. Determined and creative, Andrew also loves coffee, country music, and Sunday mornings.
User forum
0 messages
Sort by:LatestOldestMost Votes
Comment*
Name*
Email*
Commenting as.Not you?
Save information for future comments
Comment
Δ
Andrew Wafer
