Share this article
Improve this guide
Windows System Sounds Are Too Loud: How to Fix Them
When the volume is too loud on lowest settings, it’s time to take action
9 min. read
Updated onOctober 4, 2023
updated onOctober 4, 2023
Share this article
Improve this guide
Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more
Key notes
Is your system sound too loud in Windows 10 or Windows 11? Are you seeing the volume display showing as a lower level yet it plays on maximum volume, and turning it up doesn’t help?
If this is the case, or you’re having a similar problem with different specifications, then your machine could be having sound problems.
Sound issues come up when there are audio driver problems or sound files and settings are changed, resulting in the controls in the sound mixer being greyed out.
Read on to find out what to do when Windows system sounds are too loud on your device.
How can I fix Windows system sounds being too loud?
There are different ways to resolve the issue of the Windows system sounds being too loud, but you could start by rebooting your machine and installing any pending updates.
If the problem persists, you can try the solutions below to see if it goes away.
1. Restore the original audio driver
This quickly resets audio settings for the audio or sound hardware, causing Windows to reinitialize the audio configuration.
Depending on your kind of computer, a driver recovery will restore the audio drivers for your sound hardware that was pre-installed on it.
2. Use an Audio Enhancer app
First off, this helpful way to improve the system sound on your PC and boost the sound with enhancement effects. You can thus refine the sound regardless of your media player or headphone type.
Using an audio booster, the user has absolute control over the sound of the device because of the advanced band equalizer and modern audio tunning.
Hence, theBoom3Dfrom Global Delight Apps is one of the best equalizers that have been ever developed.
The solution is a no-brainer due to its intuitive UI, with great sound adjustment features, and intelligent sound-to-ear adaptation.
What you need in this situation is its equalizer feature, and here’s what you can do with it:
With these features, you will be able to minimize the volume on your Windows laptop or PC, especially if certain frequencies are too loud.
Boom 3D
3. Run Hardware Troubleshooter
The Hardware troubleshooter tool is built-in on Windows 10 operating system so as to check and resolve any sound issues you may have.
4. Update the audio driver
Update the network and the audio drivers for Windows 10 from your Device Manager manually by uninstalling, and then reinstalling them from the manufacturer’s website.
Yet, this process may become complicated due to numerous device driver versions or problematic installation. So, it’s more likely to update your drivers by usingprofessional driver updatetools.
5. Uninstall Sound card drivers
Sometimes background sound issues may be caused by a damaged or incompatible driver or a problem with your sound card.
If it is your sound card driver, complete the above procedure to uninstall it and see if it resolves the issue.
6. Buy or build an inline attenuator
If software solutions don’t help, you can buy an attenuator or build one, as this is a fixed volume reduction device or extension cable with volume control.
7. Adjust settings using Levels tab
If headphones are too loud in Windows, reconfiguring the sound level should do the trick.
8. Use Equalizer APO
Don’t hesitate to give a try to Equalizer APO when the volume is too loud. The changes will be applied immediately when saving the file.
9. Lower system volume
10. Turn off sound processor
Some computers may have a built-in sound equalizer like DTS Studio Sound, which starts automatically with Windows.
This processor can create an amplified signal forcing you to have a volume set high at 3 or 4, so you cannot adjust it, and it gets too loud.
In this case, turn off the processor to get a regular sound volume that you can modulate finely, and it will fix things when the sound is too loud in Windows 11.
11. Switch to Windows native audio driver
Depending on the audio driver your computer model uses, it could create problems like the volume being too loud in Windows 10.
If using Realtek, for example, it could cause such issues, so you can switch to the native audio driver, as described above.
To get back to the Realtek driver, do it again, but reverse the names in the steps above.
12. Install updated firmware (BIOS)
BIOS allows Windows to start when the computer is turned on. Updating it can resolve compatibility conflicts that may exist between different hardware components on the computer.
Before you begin updating the BIOS note the product number of your computer, have an Internet connection ready, and a pencil and paper.
Note:Make sure to read the overview and system requirements to confirm the BIOS update is for your computer, then click Download and save it to your desired location. Don’t select Run BIOS update over the network.
After updating the BIOS, do a sound test to check the volume. If you still find the volume too loud in Windows 10, perform a system restore, as shown in the next solution.
13. Perform a system restore
If the sound was regulated before but has since stopped working or is too loud, use the Windows System restore utility to attempt to correct the problem.
After the system restore, test the sound again to see if it restores your sound back to normalcy.
If you’re still having trouble with the volume too loud in Windows 10, post a comment in the section below and let us know the details.
Even more, keep in mind that the previously mentioned solutions may be applied when dealing with any of these issues:
We hope you managed to fix the Windows system sound too loud issue on your device using our guide. Let us know which solution worked for you in the comments section below.
More about the topics:Fix audio issues,windows 10
Milan Stanojevic
Windows Toubleshooting Expert
Milan has been enthusiastic about technology ever since his childhood days, and this led him to take interest in all PC-related technologies. He’s a PC enthusiast and he spends most of his time learning about computers and technology.
Before joining WindowsReport, he worked as a front-end web developer. Now, he’s one of the Troubleshooting experts in our worldwide team, specializing in Windows errors & software issues.
User forum
1 messages
Sort by:LatestOldestMost Votes
Comment*
Name*
Email*
Commenting as.Not you?
Save information for future comments
Comment
Δ
Milan Stanojevic
Windows Toubleshooting Expert
Before joining WindowsReport, he worked as a front-end web developer. Now, he’s specialized in Windows errors & software issues.
Reviewed byVlad Turiceanu
Coming from a solid background in PC building and software development, he’s a Windows 11 Privacy & Security expert.More about Vlad ›
